- Answered: Medium-Sized Balls in the Goals
- Answered: Goal blocking with medium balls?
- Answered: width between goals (was: clean sweep)
- Answered: Clarification of Robot starting position <SG1>
- Answered: Large ball question
- Answered: de-scoring methods
- Answered: detachment
- Answered: "Blocking" (was: Clean Sweep ???)
- Answered: Shooting Balls?
- Answered: Entanglement
- Answered: <R10> and <R12>
- Answered: Clarification of <SG2>
- Answered: alternate non-vex components
- Answered: Ball Tee Height Question
- Answered: Skills Challenges and the Large Ball
- Answered: Programming Skills Robot
- Answered: Clarification of <T03> and 3rd match robots
- Answered: College
- Answered: Starting Position - Spring Loaded Mechanisms
- Answered: Flashlight Kit Allowed?
- Answered: Blocking Goals with Medium Ball Scoring
- Answered: Modularity, configurations, and changes between matches.
- Answered: Pneumatic configuration rules
- Answered: College Challenge
- Answered: Chroming / Powdercoating of Robot Components
- Answered: Mod parts?
- Answered: Balls in dumping mechanism at end of match
- Answered: Rubber bands
- Answered: Clarification of <T04> Use of Time out
- Answered: Clarification on Rule <SG3>
- Answered: VEXNet
- Answered: Are preloaded balls considered part of the Robot by <R4>?
- Answered: The intent of SG4?
- Answered: College Challenge Qualification Rounds?
- Answered: VRC College questions
- Answered: Limit on Pneumatics??
- Answered: College Challenge ID specifications
- Answered: Competions using Vexnet vs. crystals
- Answered: Did these balls get scored?
- Answered: VEX College Details (Products & Rules)
- Answered: Awards?
- Answered: Clarification on Rule G9 - entanglement/pinning
- Answered: Rule Clarification - Touching the Far Side of the Field
- Answered: Amount of non slip mat?
- Answered: Is this non slip mat usable
- Answered: 18" rule
- Answered: Shrink Tubing
- Answered: 8-32 3/8" screws from Home Depot
- Answered: Power Switch Accessiblity
- Answered: Anodizing aluminum
- Answered: Touching Goals over the Wall
- Answered: Programming template
- Answered: The Scoring Software
- Answered: Metric Cable Ties
- Answered: 9V backup battery
- Answered: Pneumatics Recharge Question
- Answered: What is the size of the triangular 18" goal?
- Answered: which kind of rubber bands can we use ?
- Answered: The tapes that we use to change the size of robot
- Answered: Crystals in VEXNet Fields
- Answered: Cable Ties
- Answered: Faux Power Expander
- Answered: where to go
- Answered: G1 clarification
- Answered: Are there any rules?
- Answered: Rule <R15> clarification needed for limit switch
- Answered: College Rule 8, early win when all balls on one side
- Answered: Scoring Zone Confusion
- Answered: Pneumatic Reservoirs
- Answered: World Championship Responses
- Answered: VEX- Anti-Slip Mat
- Answered: Using VEX slides illegal?
- Answered: Citing Rule Book
- Answered: Use of Multiple Controllers
- Answered: Who gets to place their robot last?
- Answered: Large Ball scoring
- Answered: Large ball introduction, immediately rolls off-field
- Answered: Anti-slip mats again...
- Answered: College Challenge Questions
- Answered: Electrical Tape Limits
- Answered: auto scoring
- Answered: <R15> and possible string usage
- Answered: usage of polycarbonate sheets?
- Answered: Difference between tie straps
- Answered: fuel tubings?
- Answered: <SG2> and ball-to-ball contact
- Answered: Programing Questions
- Answered: Intentionally Disconnecting
- Answered: morphing robots
- Answered: Polycarbonate Sheets
- Answered: Question about cable ties;Duramax edition
- Answered: Clarification on Rule G6
- Answered: Pneumatics
- Answered: Playing objects out of play
- Answered: Can we use wire that is identical to extension cable?
- Answered: Official Position on Extension Cables
- Answered: Red And Blue Tiles
- Answered: Buying the correct robot
- Answered: Using Pnuematics for the Clean Sweep Competition 2010
- Answered: Just a few questions Any help is greatly appreciated
- Answered: Pressure gauge on pneumatics
- Answered: can you pass the remote to anouther driver
- Answered: can a judge take out the robot
- Answered: White Ball in Programming Skills
- Answered: Drive Shaft
- Answered: Competition Floor
- Answered: SP if Two Teams are "no shows"
- Answered: PWM Cables
- Answered: Motors with the CORTEX
- Pending: Mentor of the Year Award @World Championships
- Answered: leaning against the perimeter wall - Legal?
- Answered: RobotC Programming Templates
- Answered: Specific questions regarding the use of paint.
- Answered: Size measurement at match time
- Answered: Preloads in Starting Dimensions
- Answered: Green Balls as part of robot construction??
- Answered: Wire Repair
- Answered: using a different robot for Worlds
- Answered: straws on reciever antenna
- Answered: Large Ball Introduction
- Answered: Number of Y-splitters allowed
- Answered: Clarification on Rule <T03>
- Answered: How to address improper scoring at an event
- Answered: Paint on robot.
- Answered: Can I Use Some Other Products From SMC？
- Answered: Robot Decal?
- Answered: Can I Use This Air Tube?
- Answered: An easy question about rubber band
- Answered: Number if drivers/coaches
- Answered: Serial/I2C Cortex interface
- Answered: Essay Submission Awards
- Answered: College Awards
- Answered: Mentor of the Year Award (Worlds)
- Answered: Number of batteries on robot
- Answered: People who wear glasses
- Answered: College rules clarification
- Answered: Rubber Bands
- Answered: New Products @2010 World Championship